The PF2100F is a Flare Ignition System designed for use with flare stacks and flare pits where the pilot gas must be controlled by a valve. Flame detection is achieved via thermocouples and user-selectable set points. An optional MODBUS card can be added to the system to enable remote control of the system and remote monitoring of the flare temperature, system status, and other parameters.
Additional Zoning Capability:
- Class I, Division 2, Groups A, B, C, and D; T4A, Type 4X
- Ex nA IIC T4 IP66
- Class 1, Zone 2, AEx, nA IIC T4 IP66
For further zoning and approval information, see the
PF2100.
Power Supply Requirements | VALUE |
---|
Base Model | 12/24 VDC |
Power Consumption | 12VDC | 24VDC |
---|
Controller Only (Display On) | 2.6 W | 2.9 W |
Controller Only (Display Off) | 1.1 W | 1.2 W |
Max Total Current Draw | 5 A | 5 A |
Max Valve Current Draw | 2 A | 2 A |
Ignition Voltage (Internal Coil) | Up to 20kV | Up to 40kV |
Temperature Ratings | Min | Max |
---|
Operating Range | -40°C (-40°F) | +55°C (+130°F) |
Storage Range | -40°C (-40°F) | +80°C (+176°F) |
Terminal Blocks | VALUE |
---|
Maximum Wire Gauge | 12 AWG |
Status Contact | VALUE |
---|
Type | Dry |
Max Voltage | 40 VDC |
Max Continuous Current | 250 mA |
Impedance (When Closed) | 15Ω |
Physical Dimensions | VALUE |
---|
Width | 30.9 cm (12.15 in) |
Height | 23.4 cm (9.23 in) |
Depth | 13.4 cm (5.28 in) |
Weight | VALUE |
---|
Base Model | 4.0 lbs (1.8kg) |
Base Model Plus 1 Expansion Card | 4.5 lbs (2.0 kg) |
Base Model Plus 2 Expansion Cards | 6.0 lbs (2.6 kg) |