The PF2100i is an Incinerator Management System designed for use with incinerators and combustors where complete combustion of a waste gas is desired. To ensure complete combustion, the combustion chamber must be maintained above a certain temperature before the waste gas is permitted to flow. The PF2100i achieves this by providing a thermocouple to monitor the chamber temperature and a valve to control the waste gas.
An optional MODBUS card can be added to the system to enable remote control of the system and remote monitoring of the incinerator temperature, system status, and other parameters.
| Power Supply Requirements | VALUE |
|---|
| Base Model | 12/24 VDC |
| Power Consumption | 12VDC | 24VDC |
|---|
| Controller Only (Display On) | 2.6 W | 2.9 W |
| Controller Only (Display Off) | 1.1 W | 1.2 W |
| Max Total Current Draw | 5 A | 5 A |
| Max Valve Current Draw | 2 A | 2 A |
| Ignition Voltage (Internal Coil) | Up to 20kV | Up to 40kV |
| Temperature Ratings | Min | Max |
|---|
| Operating Range | -40°C (-40°F) | +55°C (+130°F) |
| Storage Range | -40°C (-40°F) | +80°C (+176°F) |
| Terminal Blocks | VALUE |
|---|
| Maximum Wire Gauge | 12 AWG |
| Status Contact | VALUE |
|---|
| Type | Dry |
| Max Voltage | 40 VDC |
| Max Continuous Current | 250 mA |
| Impedance (When Closed) | 15Ω |
| Physical Dimensions | VALUE |
|---|
| Width | 30.9 cm (12.15 in) |
| Height | 23.4 cm (9.23 in) |
| Depth | 13.4 cm (5.28 in) |
| Weight | VALUE |
|---|
| Base Model | 4.0 lbs (1.8kg) |
| Base Model Plus 1 Expansion Card | 4.5 lbs (2.0 kg) |
| Base Model Plus 2 Expansion Cards | 6.0 lbs (2.6 kg) |
