ARE YOU PUMPING MONEY DOWN THE WELL?

It is estimated that the oil and gas industry will spend $10.5 Billion on chemical this year. It's also estimated that up to 20% of that is unnecessary expense because of over-injection. That's potentially over $2.5 Billion in waste. Wouldn't you like to capture some of that?

IT SEEMS LIKE A NO BRAINER...BUT WE UNDERSTAND WHY YOU HAVEN'T.

Technology Restrictions
TECHNOLOGY RESTRICTIONS

While some chemicals suggested injection rates are 1/6 gallon (0.5 liters) per day, the pumps have a minimum flow of 1 gallon (3.78 liters) per day. Lower injection rates aren't possible.

Prohibitive Cost
PROHIBITIVE COST

Unless a solution can be retrofitted to work with existing equipment, the cost would be too high.

Risk of Downtime
RISK OF DOWNTIME

Most "fixes" involve altering the pump's efficiency, lowering rates, but increasing the risk of pump failure, exposure, wax, scale, corrosion, freeze-ups, and potential downtime.

There was no practical alternative to pumping money down the well in the form of chemical.

UNTIL NOW

The Answer:
Intelligent Injection

Intelligent Injection means decreasing waste while preventing shortages.

The PC180, Profire's patented chemical management system, was developed so that low target injection rates (as low as 1/6 gallon/day or 1/2 liter/day) could be achieved with your existing pump, virtually eliminating over injection. Reduced chemical waste produces big savings.

At the same time, the PC180 recognizes when working conditions have changed because of gas rates, H2S ppm, temperatures, pressures, etc. It then adjusts injection rates automatically. Intelligent injection means dynamic optimization ensuring a reliable injection rate without the need to over inject.


The Bottom Line

Profire's chemical management system, significantly reduces costs, and drives efficiency by optimizing chemical injection at each site.

  • Reducing costs by achieving a stable and expected daily injection volume, eliminating unnecessary chemical consumption.

     
     
  • Reducing wear and tear and site maintenance cost associated with under injecting of corrosion inhibitors..

     
     
  • Eliminating the cost of breaking up freeze ups due to under injection of dehydrate agents.

     
     
  • Automatic Warnings that a pump is down, or you have a leak on the injection header or pump check valves.

     
     
  • Automatic adjustment of the amount of chemical injection levels based on real time data.

     
     
  • Remote Access reduces the number of site visits to check on equipment.

     
     
  • Efficiency increased in each site's chemical usage and operating cost.

     
     

ARE YOU READY TO FIND OUT WHAT INTELLIGENT CHEMICAL MANAGEMENT IS ALL ABOUT?

Learn more about what we offer.

Request a Consultation